View CA3100E20-27PWF80_519637.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MIL-C-5015 Connectors
ITT Cannon is the foremost manufacturer of MS and MS type connectors with the widest range of connector styles, sizes and variations in the industry. These connectors utilize the finest materials, which, along with precision manufacturing and rigid quality control, assure ITT Cannon customers of the finest quality connectors. These circular connectors were originally designed for aircraft, but are now widely used in many other fields. They are particularly suitable for commercial applications requiring low cost and high reliability.
MS-E/F/R/ER
ENVIRONMENTAL RESISTANT MS-E, MS-F, MS-R AND F80 (Solder/Crimp Termination) MS-E, MS-F and MS-R are similar to MS-A and MS-B connectors but have resilient insulators and wire sealing grommets for extreme environmental conditions and high altitude sealing. MS-E's and MS-F's have a mechanical cable clamp; the MS-R has a shorter, lighter weight endbell without the cable clamp. Both the MS-F and MS-R have 0 rings to supplement the interfacial seal. Shells are aluminum alloy. Contacts are siliver plated copper alloy. The F80 modification (crimp contact termination) is available in E, R, F and BFR styles with resilient insulators.
POTTING ER CONNECTORS (Solder Contact Termination) These lightweight potting connectors provide resistance to salt water, fuels, etc., and will withstand the effects of high vibration. 3100 and 3106 connectors with plastic potting cups and resilient inserts meet the requirements of MS3103 and MS25183. Contacts are silver plated copper or brass. ER insulators are resilient; shells are aluminum alloy. A 90 plug (3108ER) is also available.
ACCESSORIES Accessories to fit MS connectors include junction shells, protective caps, dummy or stowage receptacles, cable clamps, telescoping bushings.
How to Order
In the latest revision of MIL-C-5015, a new class of environment-resistant connectors was added. This new class F connector supersedes the previous class E connector. The MS3106F is identical to the MS3106E except that the MS3106F has an "0" ring under the coupling nut. The class E will still be available upon request for exitsting programs, and upon ordering will also bear the E nomenclature on the shell. MS-F and MS-R connectors are designed to operate in the extreme environmental conditions of high altitude filight and must be completely sealed to withstand moisture, condensation, vibration, corona and flashover caused by high altitude environments. They have resilient grommet with internal restrictions in the wire cavities which act as 0 rings around the wires. This allows the wires to slide thru the grommet with a minimum of friction, yet when the ferrule is seated and the endbell tightened it provides a perfect wire seal thru a wide variety of wire diameters. This seal at the rear, plus the interfacial seal at the front, effects a completely environment-resistant asssembly when the plug is mated to and F or R receptacle. Sockets are of the closed-entry type. The temperature range for this connector is -55C (-67F) to +125C (+257F) and meets the requirements of MIL-C-5015. The F80 modification (crimp contact termination) is avialable in resilient insulators in the E, R, F, and BFR styles, creating a large selection of insert assemblies and hardware. Components are identical to the MS-5015 except that the contacts are modified for crimp termination providing and inexpensive crimp contact connector with the proven reliability of and complete intermateability with the MS-5015 series. See page 187 for assembly instructions. Cable clamps have been integrally designed with the endbell on MS-E and MS-F connectors. Class R is without the cable clamp. CA MS PREFIX SHELL STYLE CLASS SHELL SIZE CONTACT ARRANGEMENT CONTACT TYPE ALTERNATE INSERT POSITION MODIFICATION CODE PREFIX MS - Conforms to latest MIL-C-5015 revision CA - Cannon designation (for any modification) SHELL STYLE 3100 - Wall mounting receptacle 3101 - Cable connecting plug 3102 - Box mounting receptacle * 3106 - Straight plug 3108 - 90 angle plug CLASS E/F - Environmental with resilient insulators and integral cable clamp. R - Environmental with resilient insualtors and shortened light weight endbell; also additional sealing with 0 ring seal under coupling nut in styles 3106 and 3108 * When ordering MS3106F to the Cannon part number, designate
CA06R. See pages 177 and 181.
3106 3106
R 20 - 27 P W R 20 - 27 P W
* -
SHELL SIZE Coupling thread diameter in sixteenths of an inch CONTACT ARRANGEMENTs See pages 171-174 CONTACT TYPE P for Pin; S for Socket ALTERNATE INSERT POSITION W, X, Y and Z (omit for "Normal") MODIFICATION CODE (applies to CA numbers only, not MS) F80 - Crimp type contacts. See page 187 for assembly instructions.
Dimensions are shown in inches (millimeters). Dimensions subject to change.
www.ittcannon.com
167
MIL-C-5015 Connectors
Performance and Material Specifications
MATERIALS AND FINISHES
Shell Material Finish Insulator Contacts Material Material Finish Termination Aluminum alloy O.D. Chromate coating over cadmium plating Polychloroprene (resilient) Brass or copper alloy Silver plate Tinned solder pot
MS-E/F/R/ER
CONTACTS Pin and socket contacts are designed to resist severe vibration and repeated connection and disconnection. The average force to either engage or separate pin and socket contacts will not exceed the average values given in the latest revision of MIL-C-5015.
FORCE In lbs. Maximum Average Minimum 16 3.00 2.10 .25 12 5.00 3.50 .50 Contact Sizes 8 10.00 7.00 .75 4 15.00 10.50 1.00 0 20.00 14.00 2.00
WIRING For class E, R and F connectors, satisfactory moisture sealing will be obtained if AWG and MS wire sizes and insulation outside diameters are governed by this table.
Contact Wire Size Size (MIL-W-5086) 16 12 8 4 0 16 thru 20 12 thru 14 8 thru 10 4 thru 6 0 thru 2 Insulation OD Limit (inches) .064 (1.63) min. to .130 (3.30) max. .114 (2.90) min. to .170 (4.32) max. .164 (4.17) min. to .255 (6.48) max. .275 (6.98) min. to .370 (9.40) max. .415 (10.54) min. to .550 (13.97) max.
THERMOCOUPLE CONTACTS Sizes 12 and 16 contacts, machined from matching thermocouple lead wire alloys, can be supplied in ITT Cannon connectors. These thermocouple contacs maintain continuity from thermal-sensor leads thru a bulkhead of other closures in temperature measuring applications. These contacts for matching lead wires are detailed by the standards of the Instrument Society of America (I.S.A);
I.S.A Standards J and Y K T Material Iron and constantan Chromel and alumel Copper and constantan
ELECTRICAL SERVICE DATA Test current ratings of contacts and allowable voltage drop under test conditions when assembled as in service are shown below. Maximum total current to be carried per connector is the same as the allowable in wire bundles as specified in MILW-5088.
Contact Size 16 12 8 4 0 Test Current (amps) 13 23 46 80 150 Potential Drop (millivolts) 49 42 26 23 21
Since the thermocouple connector applications determines the soldering methods and materials to be used, thermocouple contacts, identified by permanent markings, are normally supplied with untinned solder pots. Thermocouple contacts are supplied only in connectors having resilient insulators. HIGH POTENTIAL TEST VOLTAGE MS connectors show no evidence of breakdown when the test voltage given below is applied between the two closest contacts and between the shell and the contacts closest to the shell for a period of one minute.
MS Service Rating Inst. A D E B C Test Voltage (RMS] 60 cps 1000 2000 2800 3500 4500 7000 Suggested * Operating Voltages DC AC (rms) 250 700 1250 1750 2450 4200 200 500 900 1250 1750 3000 1/16 1/8 3/16 1/4 5/16 Air Spacing Nom. (inches) Creepage Distance Nom. (inches) 1/16 1/8 3/16 1/4 5/16 1
* As indicated in previous MS Specification and to be used by designer only as a guide.
High Voltage Cartridges for MS-E and MS-R (HV310*E/R Series)
High voltage conductors as well as power and/or control signal conductors can now be connected simultaneously in standard MS connectors. Previously, MS connectors involved in high voltage circuitry required individual design considerations and could only be ordered as a "special." The new high voltage cartridge allows conversion of a standard connectors to one capable of handling up to 15,000 volts DC (Test Voltage - mated), operating voltage - See level 5,000 VDC or 3,500 VAC. These cartridges are molded of nylon and provide as high degree of arc-over protection between adjacent contacts or between a contact and the connector shell. Unmated, each cartridge provides a nylon isolating barrier capable of withstanding up to 10,000 volts DC (or peak). The contact within the cartridge is a 7.5 amp. size 20, crimp snap-in type with dielectric rear release clip retention. This contact is removable with the plastic CIET20 insertion/extraction tool provided the insulation is .084 (22.45) or less. The contact may be crimped with the standard MS-3191 tool and MS-3191-20A locator and hand inserted into the nylon cartridge. The cartridge body is installed in the connector at the factory. High voltage cartridges now available fit the space normally occupied by a #4 o #8 size contact in an MS-E, MS-R or MS-F type connector. Over forty-nine contact arrangements are currently available in which these high voltage cartridges may be used. Contsult factory for ordering information.
* * *
Standard contact arrangements are adaptable to high voltage applications. Eliminates need for a separate high voltage connector. Assembly time is reduced.
Dimensions are shown in inches (millimeters). Dimensions subject to change.
www.ittcannon.com
168
MIL-C-5015 Connectors
MS Alternate Insert Positions
All views are looking into front of pin insert of rear of socket insert.
MS-E/F/R/ER
B
A
Normal Position Contact Shell ArrangeSize ment Contact Alternate Positions-Degrees Shell ArrangeSize ment Service Rating W X Y Z
Position W
Position X Contact Shell ArrangeSize ment
Position Y
Position Z Alternate Positions-Degrees
Wire Size
Wire Size
Alternate Positions-Degrees Service Rating W X Y Z
Wire Size
Service Rating
W
X
A
A
B
A
B
A
B
B
Y
Z
8S 8S-1 10S 10S-2 10SL-4 10SL-3 12 12-5 12S 12S-4 12S-3 14 14-3 14S 14S-1 14S-2 14S-5 14S-6 14S-7 14S-9 16 16-9 16-10 16-12 16-11 16-13 16S 16S-1 * 16S-4 16S-5 16S-6 16S-8 18 18-1 18-3 18-4 18-5 18-7 18-8 18-9 18-10 18-11 18-12 * 18-13 * 18-15 18-19 * 18-22 20 20-2 20-3 20-4 20-7 20-8 20-14 20-15 20-16 20-17 20-18 20-19
1 #16 1 #16 2 #16 3 #16 1 #12 1 #16 2 #16 1 #8 3 #16 4 #16 5 #16 6 #16 3 #16 2 #16 2 #16 2 #12 3 #12 1 #4 2 #12 2 #12 7 #16 2 #16 3 #16 3 #16 5 #16 10 #16 2 #12 4 #16 1 #16 2 #12 1 #8 7 #16 1 #12 5 #16 2 #12 4 #12 5 #12 6 #16 3 #12 1 #8 4 #12 10 #16 3 #16 1 #0 3 #12 4 #12 8 #16 4 #16 2 #8 3 #12 2 #8 7 #12 7 #16 2 #12 1 #16 5 #12 6 #16 3 #12 3 #8
A A A A D D A A A Inst. Inst. Inst. A A A A A A A A D A A A A(B,C,F,G) Inst.(all others) D D D B A Inst. A A A A A A D D D D A(C-F) D(A,B,G,H) Inst. A A A A A A
70 90 70 35 90 35 35 80 35 70 90 70 35 35 80 70 80 80 80 70 70 45 80 80 80 80 80 90 35 90
-
-
290 -
20
20-22 20-23 20-24 20-27 20-29 20-33
145 215 -
3 #16 3 #8 2 #8 2 #16 2 #8 14 #16 17 #16 11 #16 3 #8 2 #12 2 #8 4 #16 2 #12 1 #16 2 #8 1 #0 3 #12 4 #16 2 #16 3 #16 2 #8 1 #16 4 #12 19 #16 1 #16 5 #12 8 #16 1 #12 8 #16 14 #16 9 #16 4 #8 8 #12 8 #16 1 #8 7 #12 7 #12 16 #16 8 #12 14 #16 2 #12 2 #4 7 #8 6 #12 3 #8 3 #12 2 #4 9 #16 2 #12 4 #8 7 #16 24 #16 6 #12 3 #8 12 #16 2 #12 2 #4 6 #16 6 #12
A A A A A A D A D D E E E B D A(A-D) D(E) A A(A-C,E,F) E(D) D(A) A(all others) A(C-E) D(all others) A A A D(H) A(all others) D(J) A(all others) A D A D(A,G,H) A(all others) A A A A A D D E Inst. D)A,E,J) A(all others) D D D
80 35 35 35 80 70 35 35 80 70 35 35 80 35 80 80 80 80 80 35 35 80 80 80 80 80 80 35 80 35 80 80 45 80 80 80 35 35 80
110 110 110 110 145 110 110 110 145 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110
250 250 250 250 215 250 250 250 215 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250
280 325 325 325 280 290 325 325 280 290 325 325 280 325 280 280 280
28
28-10
28-11 28-12 28-15 28-16 * 28-17 * 28-19 28-20 28-21 * 28-22 32 * 32-1 * 32-6
22
120 240 110 180 270 145 215 290 110 180 110 110 110 145 180 170 145 110 110 110 110 120 170 110 120 120 145 250 270 250 250 250 215 270 265 325 325 325 280 325 290 -
22-2 * 22-4 22-5 * 22-6 22-7 22-9 22-10 22-11 22-12 22-13 22-14 * 22-15 22-17 22-18 22-19 22-20 22-22 22-23 * 22-27 22-28
3 #12 2 #8 2 #4 18 #16 4 #12 26 #16 35 #16 20 #16 15 #16 6 #16 4 #12 4 #16 10 #16 37 #16 3 #16 3 #4 3 #12 2 #0 16 #16 2 #12 3 #8 2 #4 28 #16 7 #12 24 #16 6 #12 12 #16 2 #4 2 #0 6 #12 4 #4 3 #0 4 #0 4 #4 2 #0 40 #16 7 #12 46 #16 1 #12 14 #16 14 #12 2 #8 1 #4 48 #16 6 #16 5 #12 5 #8 35 #16 16 #16 9 #8 4 #4 85 #16 36 #16 6 #12 90 #16 1 #8 9 #12
D(G) A(all others) A A A A A(A-L),B(R) D(M-P) A(C,E,G,J,K,L) B(H,M), D(A,B) A A D E(A) D(all others) A
80
110 250
280
80 90 80 80 80 80 80 80 70 80 80
110 250 180 110 110 110 270 250 250 250
280 280 280 280 280 280 280 290 280 280
110 250 110 250 110 250 145 215 110 250 110 250
32-7 32-8 * 32-9
Inst. (A,B,h,j) A(all others) A D D D A(B,C) D(A) A A A A A
80 80 80 35 45 70 35 80 80 80
125 235 125 235 110 250 110 250 110 250 145 215 120 240 110 250 110 250 110 250 125 235
280 280 280 280 290 325 280 280 280
215 290 250 325 250 325 250 280 290
280 32-15 280 325 280 280 280 280 280 280 325 280 325 280 * 36-15 280 40 280 280 280 325 48 325 280 48-5 44 40-10 32-17 36 * 36-4 36-5 36-6 36-7 36-8 36-9
250 280 240 265 280 250 280 240 240 215 290 290 280 280 280 280 280 325 28 24
24-2 * 24-5 * 24-6 24-7 * 24-9 24-10 * 24-11 24-12 24-20 24-22 24-27 24-28 28-1 * 28-2 28-7 28-9
36-10 36-14
A D
80 90
125 235 180 270
280 -
145 215 110 250 110 250 110 110 110 250 250 250
D (m) A(all others) A
60 65
125 245 125 225
305 310
* 40-56 44-1
A D A
72 65 65
144 216 125 225 125 225
288 310 310
180 270 110 250
180 270
* Not MSA/B insert arrangements and polarization.
Dimensions are shown in inches (millimeters). Dimensions subject to change.
www.ittcannon.com
169
MIL-C-5015 Connectors
ITT Cannon Designated Alternate Insert Positions
Not MS approved
2 20 17 12 4
MS-E/F/R/ER
9 8,13 11 6
22 19 5,3 15
21 18 16 14
NOTE: Front view of pin insulator rotates as shown. Contact Arrangement 10SLA4 12SA10 20A37 24A24 28A16 28A51 32 36 32A10 32A47 36A16 36A34 36A46 36A66 40A27 40A33
Shell Size 10SL 12S 20 24 28
Wire Size 5 #20 4 #16 4 #8 12 #12 5 #16 4 #4 43 #16 54 #16 47 #16 18 #12 52 #16 27 #12 52 #16 4 #12 60 #16 7 #8 6 #4
Service Rating A Inst. D A A A A A A A A A A A 2 2 3 2 2 2 2 2 2 4 2 4 3 4 3 3 3 3 3 3 14 3 9 5 5 4 4 4 4 4 5 17 5 2 3 3 5 5 8
Available Position 8 13 12 13
12 8 8 5 5 5 5 5 8 20 8 9 9 8 8 8 8 8 9 22 13 13 12 9 9 9 9 9 13 13 12 12 12 12 12 17
13 13 13 13 13 18 15 20
40
Note: For ITT Cannon contact arrangements not listed, consult factory.
Position Normal 2 3 4 5 6 8 9 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26
Angle (degrees) 0 260 110 80 use pos. 3 85 250 280 105 100 use pos. 8 30 45 120 130 150 195 220 255 290 165 330 235 125
Dimensions are shown in inches (millimeters). Dimensions subject to change.
www.ittcannon.com
170
MIL-C-5015 Connectors
Contact Arrangements (Face View Pin Insert)
LEGEND Resilient only Resilient & Plastic High Volume Layouts - readily available from Cannon Distributors
A B
MS-E/F/R/ER
A C B D B A E C
B A C D A B
B A
Shell Size No. of Contacts Service Rating
8S-1 1 #16 A
10S-2 1 #16 A
10SL-4 2 #16 A
10SL-3 3 #16 A
10SLA4 5 #20 A
12S-4 1 #16 D
12-5 1 #12 D
12S-3 2 #16 A
12SA10 4 #16 Inst.
14-3 1 #8 A
14S-9 2 #16 A
C B A C B A
D C A B
E A D B
A F A E C D C B B B A B A
Shell Size No. of Contacts
14S-1 3 #16
14S-7 3 #16
14S-2 4 #16
14S-5 5 #16
14S-6 6 #16
16-12 1 #4
16-11 2 #12
16S-4 2 #16
Service Rating
A
A
Inst.
Inst.
Inst.
A
A
E D A C B E D C G B F
D
16-13 2 #12 (A-Iron B-Constantan) A
A C C B B A C B A D
A B C
B A
A
Shell Size No. of Contacts Service Rating
16S-5 3 #16 A
16S-6 3 #16 A
16-10 3 #12 A
16-9 2 #16 (B,D) 2 #12 (A,C) A
16S-8 5 #16 A
16S-1 7 #16 A
18-7 1 #8 B
18-3 2 #12 D
A C B A D A D A C B C B C B B D A D C A B D E A E D C F A
C
C
B
B
Shell Size No. of Contacts
18-5 1 #16(A) 2 #12(B,C) D
D E F G A C B
18-22 3 #16
18-4 4 #16
18-10 4 #12
18-13 3 #12 (B,C,C) 1 #8(A) A
Service Rating
D
G F H E D C B A
D
A
18-15 4 #12 (A, C-Iron; B, D-Constantan) A
18-11 5 #12
18-12 6 #16
A
A
A H G F E I J D K A B D C H J E F G B C A B C
A
A
B
C
B
Shell Size No. of Contacts Service Rating
18-9 5 #16(B,C,E-G) 2 #12(A,D) Inst.
18-8 7 #16(A-G) 1 #12(H) A
18-1 10 #16 A(B,C,F,G) Inst. (all others)
18-19 10 #16 A
20-2 1 #0 D
20-23 2 #8 A
20-3 3 #12 D
20-19 3 #8 A
D
A D
A B
D
A
C E A E F D D B C A C B D
E A F B D E
F F A E C B D C G B A
C
B C
C
B
Shell Size No. of Contacts Service Rating
20-4 4 #12 D
20-24 2 #16 (A,C) 2 #8 (B,D) A
20A37 ITT Cannon pos. #8 of 20-4 D
20-14 3 #12(C,D,E) 2 #8(A,B) A
20-8 4 #16(B,C,E,F) 2 #8(A,D) Inst.
20-17 1 #16(F) 5 #12(A-E) A
20-22 3 #16(B,D,F) 3 #8(A,C,E) A
20-15 7 #12 A
Dimensions are shown in inches (millimeters). Dimensions subject to change.
www.ittcannon.com
171
MIL-C-5015 Connectors
Contact Arrangements (Continued)
LEGEND Resilient only Resilient & Plastic High Volume Layouts - readily available from Cannon Distributors
MS-E/F/R/ER
A G H F E D C B F E D C J A B G H F E G H J D C A J B H F E K M L D A B C N B M G D L E A J C H F K H G J
J K N M F E L D A B C K J L
M T S H A N P R GF B C D E
Shell Size No. of Contacts Service Rating
20-7 8 #16 A(C-F) D(A,B,G,H)
20-16 7 #16(A-G) 2 #12(H,I) A
20-18 6 #16(A,C-E,G,H) 3 #12(B,F,I) A
20-33 11 #16 A
20-11 13 #16 Inst.
20-27 14 #16 A
20-29 17 #16 A
22-7 1 #0 E
A B A C B
A B C C
A D B
A
D
B C C
A
D
A E
A B
B
C
B
D
C
Shell Size No. of Contacts Service Rating
22-11 2 #16 B
22-2 3 #8 D
22-6 1 #16(B) 2 #8(A,C) D
22-9 3 #12 E
22-4 2 #12(A,C) 2 #8(B,D) A
22-10 4 #16 E
22-22 4 #8 A
22-12 3 #16(A,C,D) 2 #8(B,E) D
D E C
A E B
F
A B
A F E D B C E
F G D
A B C F E
G H
A F B E C D
G
A H B C G
H
A J
B C D
G F E
H J D
A B C
D
C
D
F
E
Shell Size No. of Contacts Service Rating
22-13 1 #16(E) 4 #12(A-D) A(A-D), D(E)
22-5 4 #16(A,C,D,F) 2 #12(B,E) D
22-15 1 #16(D) 5 #12(A-C,E,F) A(A-C,E,F),E(D)
22-28 7 #12 A
22-18 8 #16 A(C-E) D(all others)
22-23 8 #12 D(H) A(all others)
22-17 8 #16(A-D,F-J) 1 #12(E) D(A), A(all others)
22-20 9 #16 A
A H G F E J B J C D P H G F N E K A L M D B C J H G K T
L MA U V S F R E N P D B C C B B A D C D C D C A D A E B E G B E G B F A F A
Shell Size No. of Contacts Service Rating
22-27 8 #16(A-H) 1 #8(J) D(J), A (all others)
22-19 14 #16 A
22-14 19 #16 A
24-9 2 #4 A
24-22 4 #8 D
24-12 3 #12(B,D,E) 2 #4(A,C,) A
24-2 7 #12 D
24-10 7 #8 A
A F G E D C E B F
G H
A B D
A
B E
C F H
J K G
A
N B C L D K J H L M
A B C D E F F K C
A D G L
B E F H M J L
A C D G J M P S
B E H K N R K J I
L
A M P O
B C N D E F
C D
G
H
J
F
E
H
G
Shell Size No. of Contacts Service Rating
24-27 7 #16 E
24-6 8 #12 D(A,G,H) A(all others)
24-11 6 #12(A-C,G-I) 3 #8(D-F) A
24-20 9 #16(A-D,G-L) 2 #12(E,F) D
24-19 12 #16 6 #12(B-G) A
24A24 12 #12 A
24-5 16 #16 A
24-7 14 #16(A-M,O) 2 #12(P,N) A
Dimensions are shown in inches (millimeters). Dimensions subject to change.
www.ittcannon.com
172
MIL-C-5015 Connectors
Contact Arrangements (Continued)
LEGEND Resilient only Resilient & Plastic High Volume Layouts - readily available from Cannon Distributors
MS-E/F/R/ER
F A E K R W L S X F M T Y B G N U Z C H P V D J Q E B D D B A C A E
F
A H B G G C F E D E J C C D A B B
A
A H K J H L G F M
B C E G
J
Shell Size No. of Contacts
24-28 24 #16
28-7 2 #4
28-22 3 #16(D-F) 3 #4(A-C) D
Service Rating
Inst.
D
28-10 3 #12(A,F,G) 2 #8(B,E) 2 #4(C,D) D(G), A(all others)
28-1 6 #12(A,B,D-F,H) 3 #8(C,J,G) D(A,E,J) A(all others)
28A16 5 #16(A,D-F,J) 4 #4(B,C,G,H) A
28-19 6 #16(A-C,H,L,M) 4 #12(E,G,J,K) A(C,E,G,J,K,L) B(H,M),D(A,B)
H G M F E D J K L C A J B H G F P N E M D F E D C P G M L C P N K L A B H N J A K B A R M H B G H C J D K L E J F S R G V Q F T L U P E M N D X T M I C V W S K A B U N P R L J E F G C H D L K J A B M N Z Y X H P R S a b d W G T U V F A B C D E
K
Shell Size No. of Contacts Service Rating
28-9 6 #16(A,H-M) 6 #12(B-G) D
28-2 12 #16(A,L,N) 2 #12(M,P) D
28-20 4 #16(K-N) 10 #12(A-J,P) A
28-17 15 #16 A(A-L), B(R) D(M-P)
28-16 20 #16 A
28-11 18 #16(A-I, N-X) 4 #12(J-M) A
28-12 26 #16 A
C H P X d j l m R Y e J S Z f A D K T a g k E L U b h B F M V c G N W E K ST a g n
ABC D FG H J LMNPR U b h p c j r V d k s WX e m f Z A AB C D E GHJKL MN P RS T U F V d l t WY e m u f n v Z g p w a h r y b j s c k C B D C L F G H D A E B D E C H D l M E J N F K G B A A C B
Shell Size No. of Contacts Service Rating
28-15 35 #16 A For MIL equip design, use 28-21
28-21 37 #16 A
28A51 43 #16 A
32-17 4 #4 D
32-1 3 #12(A,C,D) 2 #0(B,E) E(A),D(all others)
32-15 2 #0(A,G) 6 #12(B,C,D,E,F,H) D
32-9 12 #16(C-N) 2 #4(A,B) D
A A E K O U W X P T V C G I L M R H B D J F c N S d a e b W X Z V P K R S L G Y U O J T N M H D I E F C A h B j k g b V c d e f a U W X Y Z P R S T J E K L M H N I O D F G H A B C W e m s P X f n t x O Y g p u y v A C J R Z h D K S a j q w E L T b k r B F M U c l G N V d C B
Shell Size No. of Contacts
Service Rating
32-6 16 #16(A-O,S) 2 #12(U,V) 3 #8(P,R,T) 2 #4(W,X) A
32-8 24 #16(A-L,T-Z,a-e) 6 #12(M-S) 2 #8(O,R) A For new MIL equip. design, use 32-7
32-7 28 #16(A-N,W-Z,a-k) 7 #12(O-V)
32A47 47 #16
32A10 54 #16
36-4 3 #0
Inst. (A,B,h,j) A(all others)
A
A
A(B,C),C(A)
*NOTE: Additional layouts are the same as shown but in unique alternate positioins. Please consult the factory.
Dimensions are shown in inches (millimeters). Dimensions subject to change.
www.ittcannon.com
173
MIL-C-5015 Connectors
Contact Arrangements (Continued)
LEGEND Resilient only Resilient & Plastic High Volume Layouts - readily available from Cannon Distributors Grommet not available. Consult factory for ordering connectors with this arrangment.
MS-E/F/R/ER
A F D
A B I B E P Q L C K R M D F E D J A B K F L S C G M T A D H N U B E J P S X b J R
E I
D H N W a e d V
S C G M U Z c Y L T f b c T W X R A Z F K d e Y a V P U O
M I J H K F L N G D E A B C
C
H
N
C G
Shell Size No. of Contacts
36-5 4 #0
36-6 4 #4(B,C,E,F) 2 #0(A,D)
36-14 6 #16(K-N,P,Q) 5 #12(B,D,F,H,J) 5 #8(A,C,E,G,I) D
Service Rating
A
A
36A16 18 #12 (B,C,V,J,K,M,N, R, T-Iron; A,D-F,H,L P,S,U-Constantan) A
36A46 27 #12
A
36-9 14 #16(A-G,Z-f) 14 #12(H-N,S-Y) 2 #8(O,R) 1 #4(P) A
S R Q P N M L K c j b a h Z J g X Y H G F T d k m e f W U V A B C D E O Y d h n u r x w z v s t i K U P V Z e j C F H L R W a f k p b g m I M A D G J S N T X c W b f m s v x N S X c g n k u z I O T Y B E B G J M U Z d p w y h r t m t n u y e j d e f p v z A D E K F H P V a V W X Y g q w Z h r x a i s b k c k u AB L R O H P C C J Q D K R A E L S B F M T G N U W c m v N X d n w f p x F P A H R Y g q y B J S Z h r z AF AG i s AA C K T D L U a j t t AA AG s z AF r y p x E M V b j a h S Z g J H R Y f C G P X N B
A F M W e n w V d m v AC AB l u E L U c k D K T b
AC AD AE
AE AD AJ
AK
AM
Shell Size No. of Contacts Service Rating
36-15 35 #16 D(m), A (all others)
36-7 40 #16(A-Z,a-s) 7 #12(t-z) A
36-8 46 #16(A-X,Z-z 1 #12(Y) A
36-10 48 #16 A
36A34 52 #16 A
36A66 52 #16(A-c,h-AK) 4 #12(d,e,f,g) A
1 A B 23 22 G M F L K E D N J H C 21 40 20 39 19 38 18 37 17 16 15 14 13 36 35 34 12 51 50 49 33 11 52 59 58 48 32 10 57 47 31 53 60 41 54 55 56 42 43 44 45 29 46 30 8 98 7 24 25 26 27 28 6 h t AC AD 2 3 4 5 X i u Y j v Z N E P F
A H R a k w
B J S b m x
C K T c n y AJ
D L U d p z q AA V f r AB M W g s
AE AF AG AT
AK AL AM AN AY
AP AR AS AZ
AU AV AW AX BD BE BF
BA BB BC
BG
BJ BK BL BS BT
BM BN BP BU BV
BR
Shell Size No. of Contacts
40A33 7 #8(G-N) 6 #4(A-F)
Service Rating
A
40-10 16 #16(A,B,E-H,M,N,P Q,V-Y,b,c) 9 #8(C,D,I,L,O,R,U,Z,a) 4 #4(K,J,S,T) A
40A27 60 #16
40-56 85 #16
A
A
A B A F L T M U G N V B H O C I P W D J R X E S K S AA Y AM Z g o a h p b j r c k s d m t BY CC e n f AX AY BJ BS AN AZ AP AQ AR BB AS AT BC BM BM BU BZ CD BV CA CB CE BP BQ BR BX AU BD BE AV AW BG BA BK BT BL BF c q AB d r AC H T e s AD J U f t AE K V g u AF C L W h v D M X j w AG AH E N Y k x AJ F P Z m y AK G Q a n z AL R b p
BH
BW
Shell Size No. of Contacts
44-1 36 #16(A-S,Z-t 6 #12(T-Y) D
Service Rating
48-5 90 #16(A-BL,BN-BT,BW,BX) 1 #8(CD) 9 #12(BM,BU,BV,BY-CC,CE) A
Dimensions are shown in inches (millimeters). Dimensions subject to change.
www.ittcannon.com
174
MIL-C-5015 Connectors
Cable Connecting Plug (Receptacle with no mounting flange)
MS3101E/MS3101F Integral Cable Clamp CA3101E/CA3101E
MS-E/F/R/ER
MS3101E cable connecting plugs are used for cable extension requirements, where mounting provisions are unnecessary. MS3101E plugs mate with 3106, 3107 and 3108 plugs. Note: the D revision of MIL-C-5015 has changed the nomenclature of the 3101 from receptacle to plug.
G
L W M K
V A Thd. S1 P B
E
MS3101R
CA3101R
MS3101R cable connecting plug is identical in purpose to the MS3101E. The MS3101R features a shorter lightweight endbell and mates with 3106, 3107 and 3108 plugs. Note: The D revision of the MIL-C-5015 specification has changed the nomenclature of the 3101 from receptacle to plug.
K Max. L Max. 2.250 (57.15) 2.250 (57.15) 2.250 (57.15) 2.250 (57.15) 2.250 (57.15) 2.250 (57.15) 2.625 (66.68) 2.625 (66.58) 2.625 (66.58) 2.688 (68.28) 2.750 (69.85) 2.750 (69.85) 2.969 (75.44) 3.031 (76.99) 3.031 (76.99) 3.281 (83.34) 3.560 (89.66)
1 L Max.
S1 M
L1 K
P G A Thd. B
Shell Size 8S 10S 10SL 12S 14S 16S 12 14 16 18 20 22 24 28 32 36 *40
B Min. .375 (9.53) .375 (9.53) .375 (9.53) .375 (9.53) .375 (9.53) .375 (9.53) .625(15.88) .625(15.88) .625(15.88) .625(15.88) .625(15.88) .625(15.88) .625(15.88) .625(15.88) .625(15.88) .625(15.88) .625(15.88)
E Max. .235 (5.97) .235 (5.97) .297 (7.54) .297 (7.54) .422 (10.72) .547 (13.89) .297 (7.54) .422 (10.72) .547 (13.89) .610 (15.49) .735 (18.67) .740 (18.80)
E Min. .102 (2.59) .102 (2.59) .140 (3.56) .140 (3.56) .195 (4.95) .255 (6.48) .140 (3.56) .195 (4.95) .255 (6.48) .285 (7.24) .350 (8.89) .350 (8.89)
G Max.
M +.031(0.79) -.000(0.00) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .750 (19.05) .750 (19.05) .750 (19.05) .750 (19.05) .750 (19.05) .750 (19.05) .812 (20.62) .812 (20.62) .875 (22.23) .875 (22.23) .875 (22.23)
P Max. .890 (22.61) .890 (22.61) .970 (24.64) .970 (24.64) 1.150 (29.21) 1.250 (31.75) .970 (24.64) 1.150 (29.21) 1.250 (31.75) 1.450 (36.83) 1.570 (39.88) 1.570 (39.88) 1.880 (47.75) 1.880 (47.75) 2.205 (56.01) 2.400 (60.96) 2.840 (72.14)
S1 Max. .515 (13.08) .640 (16.26) .640 (16.26) .765 (19.43) .890 (22.61) 1.015 (25.78) .765 (19.43) .890 (22.61) 1.015 (25.78) 1.140 (28.96) 1.265 (32.13) 1.390 (35.31) 1.515 (38.48) 1.765 (44.83) 2.015 (51.18) 2.270 (57.66) 2.427 (61.65)
V Max. .840 (21.34) .840 (21.34) .900 (22.86) .900 (22.86) 1.00 (27.94) 1.200 (30.48) .900 (22.86) 1.100 (27.94) 1.200 (30.48) 1.300 (33.02) 1.500 (38.10) 1.500 (38.10) 1.740 (44.20) 1.740 (44.20) 2.075 (52.71) 2.300 (58.42) 2.688 (68.28)
W Max. 1.046 (26.57) 1.046 (26.57) 1.125 (28.58) 1.125 (28.58) 1.343 (34.11) 1.484 (37.69) 1.125 (28.58) 1.343 (34.11) 1.484 (37.69) 1.609 (40.87) 1.890 (48.01) 1.890 (48.01) 2.170 (55.12) 2.170 (55.12) 2.656 (67.46) 2.922 (74.22) -
.844 (21.44) .125 (3.18) .969 (24.61) .125 (3.18) 1.062 (26.97) .125 (3.18) 1.062 (26.97) .140 (3.56) 1.156 (29.36) .140 (3.56) 1.281 (32.54) .140 (3.56) 1.062 (26.97) .146 (3.71) 1.156 (29.36) .146 (3.71) 1.281 (32.54) .146 (3.71) 1.344 (34.14) .180 (4.57) 1.500 (38.10) .180 (4.57) 1.625 (41.28) .180 (4.57) 1.750 (44.45) .203 (5.16) 2.000 (50.80) .203 (5.16) 2.250 (57.15) .203 (5.16) 2.500 (63.50) .203 (5.16) 2.750 (69.85) .203 (5.16)
1.838 (46.69) 1.838 (46.69) 1.838 (46.69) 1.838 (46.69) 1.838 (46.69) 1.838 (46.69) 2.181 (55.40) 2.181 (55.40) 2.181 (55.40) 2.281 (55.40) 2.281 (55.40) 2.281 (55.40) 2.281 (55.40) 2.281 (55.40) 2.322 (58.98) 2.322 (58.98) 2.427 (61.65)
.922 (23.42) .468 (11.89) .922 (23.42) .468 (11.89) 1.235 (31.37) .664 (15.87) 1.360 (34.54) .694 (17.63) 1.628 (41.35) .911 (23.14)
Not to MS specification *Not Available in MS3101E and MS3101R. Shell Size 8S 10S 10SL 12S 14S 16S 12 14 A Thread 1/2-28UNEF-2A 5/8-24UNEF-2A 5/8-24UNEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 1-20UNEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A Shell Size 16 18 20 22 24 28 32 36 40 A Thread 1-20UNEF-2A 1-1/8-18UNEF-2A 1-1/4-18UNEF-2A 1-3/8-18UNEF-2A 1-1/2-18UNEF-2A 1-3/4-18UNS-2A 2-18UNS-2A 2-1/4-16UN-2A 2-1/2-16UN-2A
Performance Specifications - Page 168 Contact, Sealing Plugs, Assembly Tools - Page 187 Contact Arrangements - Page 171-174
Dimensions are shown in inches (millimeters). Dimensions subject to change.
www.ittcannon.com
175
MIL-C-5015 Connectors
Wall Mounting Receptacle
MS3100E/MS3100F Integral Cable Clamp CA3100E/CA3100E
MS-E/F/R/ER
MS3100F wall mounting receptacles are used to carry wires thru walls or bulkheads, or to provide a means of disconnection at a bulkhead. MS3100F receptacles mate with 3106 and 3108 plugs. MS3100E is identical to MS3100F and is available upon request. For new equipment, customer should specify MS3100F.
S Typ. R Typ.
L M K
W
V
A Thd. B
E
T Dia. 4 Mtg. Holes
MS3100R
CA3100R
The MS3100R receptacle is identical in purpose to the MS3100F. The MS3100R features a shorter light weight endbell and mates with 3106 and3108 plugs.
L1 S Typ. R Typ. M K
P
A Thd. B
T Dia. 4 Mtg. Holes
Shell Size 8S 10S 10SL 12S 14S 16S 12 14 16 18 20 22 24 28 32 36 *40
B Min. .375 (9.53) .375 (9.53) .375 (9.53) .375 (9.53) .375 (9.53) .375 (9.53) .625(15.88) .625(15.88) .625(15.88) .625(15.88) .625(15.88) .625(15.88) .625(15.88) .625(15.88)
E Max. .235 (5.97) .235 (5.97) .297 (7.54) .297 (7.54) .422 (10.72) .547 (13.89) .297 (7.54) .422 (10.72) .547 (13.89) .610 (15.49) .735 (18.67) .740 (18.80) .922 (23.42) .922 (23.42)
E Min.
K Max.
L Max. 2.250 (57.15) 2.250 (57.15) 2.250 (57.15) 2.250 (57.15) 2.250 (57.15) 2.250 (57.15) 2.625 (66.68) 2.625 (66.58) 2.625 (66.58) 2.688 (68.28) 2.750 (69.85) 2.750 (69.85) 2.969 (75.44) 3.031 (76.99) 3.031 (76.99) 3.281 (83.34)
1 L Max.
M +.031 -.000 .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27)
P Max. .890 (22.61) .890 (22.61) .970 (24.64) .970 (24.64)
R + .005 _ .594 (15.09) .719 (18.26) .719 (18.26) .812 (20.62) .906 (23.01) .969 (24.61) .812 (20.62) .906 (23.01) .969 (24.61)
S + .031 _
T +.010 -.005
V Max.
W Max.
.102 (2.59) .125 (3.18) .102 (2.59) .125 (3.18) .140 (3.56) .125 (3.18) .140 (3.56) .140 (3.56) .195 (4.95) .140 (3.56) .255 (6.48) .140 (3.56) .140 (3.56) .146 (3.71) .195 (4.95) .146 (3.71) .255 (6.48) .146 (3.71) .285 (7.24) .180 (4.57) .350 (8.89) .180 (4.57) .350 (8.89) .180 (4.57) .468 (11.89) .203 (5.16) .468 (11.89) .203 (5.16) .664 (15.87) .203 (5.16) .694 (17.63) .203 (5.16)
1.838 (46.69) 1.838 (46.69) 1.838 (46.69) 1.838 (46.69) 1.838 (46.69) 1.838 (46.69) 2.181 (55.40) 2.181 (55.40) 2.181 (55.40) 2.281 (55.40) 2.281 (55.40) 2.281 (55.40) 2.281 (55.40) 2.281 (55.40) 2.322 (58.98) 2.322 (58.98)
.875 (22.23) .120 (3.05) 1.000 (25.40) .120 (3.05) 1.000 (25.40) .120 (3.05) 1.094 (27.79) .120 (3.05)
.840 (21.34) 1.046 (26.57) .840 (21.34) 1.046 (26.57) .900 (22.86) 1.125 (28.58) .900 (22.86) 1.125 (28.58)
.562 (14.27) 1.150 (29.21) .562 (14.27) 1.250 (31.75) .750 (19.05) .970 (24.64)
1.188 (30.18) .120 (3.05) 1.100 (27.94) 1.343 (34.11) 1.281 (32.54) .120 (3.05) 1.200 (30.48) 1.484 (37.69) 1.094 (27.79) .120 (3.05) .900 (22.86) 1.125 (28.58)
.750 (19.05) 1.150 (29.21) .750 (19.05) 1.250 (31.75)
1.188 (30.18) .120 (3.05) 1.100 (27.94) 1.343 (34.11) 1.281 (32.54) .120 (3.05) 1.200 (30.48) 1.484 (37.69) 1.375 (34.93) .120 (3.05) 1.300 (33.02) 1.609 (40.87) 1.500 (38.10) .120 (3.05) 1.500 (38.10) 1.890 (48.01) 1.625 (41.28) .120 (3.05) 1.500 (38.10) 1.890 (48.01) 1.750 (44.45) .147 (3.73) 1.740 (44.20) 2.170 (55.12) 2.000 (50.80) .147 (3.73) 1.740 (44.20) 2.170 (55.12) 2.250 (57.15) .173 (4.39) 2.075 (52.71) 2.656 (67.46) 2.500 (63.50) .173 (4.39) 2.300 (58.42) 2.922 (74.22) 2.750 (69.85) .173 (4.39) 2.688 (68.28) -
.750 (19.05) 1.450 (36.83) 1.062 (26.97) .750 (19.05) 1.570 (39.88) 1.156 (29.36) .750 (19.05) 1.570 (39.88) 1.250 (31.75) .812 (20.62) 1.880 (47.75) 1.375 (34.93) .812 (20.62) 1.880 (47.75) 1.562 (39.67) .875 (22.23) 2.205 (56.01) 1.750 (44.45) .875 (22.23) 2.400 (60.96) 1.938 (49.23) .875 (22.23) 2.840 (72.14) 2.188 (55.58)
.625(15.88) 1.235 (31.37) .625(15.88) 1.360 (34.54) .625(15.88) 1.628 (41.35)
.911 (23.14) .203 (5.16) 3.560 (89.66) 2.427 (61.65)
Not to MS specification *Not Available in MS3101E and MS3101R. Shell Size 8S 10S 10SL 12S 14S 16S 12 14 A Thread 1/2-28UNEF-2A 5/8-24UNEF-2A 5/8-24UNEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 1-20UNEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A Shell Size 16 18 20 22 24 28 32 36 40 A Thread 1-20UNEF-2A 1-1/8-18UNEF-2A 1-1/4-18UNEF-2A 1-3/8-18UNEF-2A 1-1/2-18UNEF-2A 1-3/4-18UNS-2A 2-18UNS-2A 2-1/4-16UN-2A 2-1/2-16UN-2A
Performance Specifications - Page 168 Contact, Sealing Plugs, Assembly Tools - Page 187 Contact Arrangements - Page 171-174
Dimensions are shown in inches (millimeters). Dimensions subject to change.
www.ittcannon.com
176
MIL-C-5015 Connectors
Straight Plug
MS3106E/MS3106F Integral Cable Clamp CA3106E/CA06R
MS-E/F/R/ER
MS3106F straight plugs mate with 3100 and 3102 receptacles and 3101 plugs. The MS3106E is available upon request. For new equipment, customer should specify. MS3106F. MS3106E is identical to MS3106F except to O ring under the coupling nut.
W V
L J**
A Thd.
P1
E
MS3106R
CA3106R
The MS3106R striaght plug is identical in puropse to the MS3106F. The MS3106R has the shorter endbell. This plug will mate with 3100 and 3102 receptacles and 3101 plugs.
P1 J**
L1
A
N
Shell Size 8S 10S 10SL 12S 14S 16S 12 14 16 18 20 22 24 28 32 36 * 40
E Max. .235 (5.97) .235 (5.97) .297 (7.54) .297 (7.54) .422 (10.72) .547 (13.89) .297 (7.54) .422 (10.72) .547 (13.89) .610 (15.49) .735 (18.67) .740 (18.80) .922 (23.42) .922 (23.42) 1.235 (31.37) 1.360 (34.54) 1.628 (41.35)
E Min. .102 (2.59) .102 (2.59) .140 (3.56) .140 (3.56) .195 (4.95) .255 (6.48) .140 (3.56) .195 (4.95) .255 (6.48) .285 (7.24) .350 (8.89) .350 (8.89) .468 (11.89) .468 (11.89) .664 (15.87) .694 (17.63) .911 (23.14)
J** Max. .536 (13.61) .536 (13.61) .536 (13.61) .536 (13.61) .536 (13.61) .536 (13.61) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39)
L Max. 2.250 (57.15) 2.250 (57.15) 2.250 (57.15) 2.250 (57.15) 2.250 (57.15) 2.250 (57.15) 2.625 (66.68) 2.625 (66.68) 2.625 (66.68) 2.688 (68.28) 2.750 (69.85) 2.750 (69.85) 2.969 (75.41) 3.031 (76.99) 3.031 (76.99) 3.281 (83.34) 3.560 (89.66)
1 L Max.
N Max. .890 (22.61) .890 (22.61) .970 (24.64) .970 (24.64) 1.150 (29.21) 1.250 (31.75) .970 (24.64) 1.150 (29.21) 1.250 (31.75) 1.450 (36.83) 1.570 (39.88) 1.570 (39.88) 1.880 (47.75) 1.880 (47.75) 2.205 (56.01) 2.400 (60.96) 2.840 (72.14)
P1 Max. .844 (21.44) .969 (24.61) .969 (24.61) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.344 (34.14) 1.469 (37.31) 1.594 (40.49) 1.719 (43.66) 1.969 (50.01) 2.219 (56.36) 2.469 (62.71) 2.723 (69.16)
V Max. .840 (21.34) .840 (21.34) .900 (22.86) .900 (22.86) 1.00 (27.94) 1.200 (30.48) .900 (22.86) 1.100 (27.94) 1.200 (30.48) 1.300 (33.02) 1.500 (38.10) 1.500 (38.10) 1.740 (44.20) 1.740 (44.20) 2.075 (52.71) 2.300 (58.42) 2.688 (68.28)
W Max. 1.046 (26.57) 1.046 (26.57) 1.125 (28.58) 1.125 (28.58) 1.343 (34.11) 1.484 (37.69) 1.125 (28.58) 1.343 (34.11) 1.484 (37.69) 1.609 (40.87) 1.890 (48.01) 1.890 (48.01) 2.170 (55.12) 2.170 (55.12) 2.656 (67.46) 2.922 (74.22) -
1.838 (46.69) 1.838 (46.69) 1.838 (46.69) 1.838 (46.69) 1.838 (46.69) 1.838 (46.69) 2.181 (55.40) 2.181 (55.40) 2.181 (55.40) 2.281 (55.40) 2.281 (55.40) 2.281 (55.40) 2.281 (55.40) 2.281 (55.40) 2.322 (58.98) 2.322 (58.98) 2.427 (61.65)
Not to MS specification Shell Size 8S 10S 10SL 12S 14S 16S 12 14 A Thread 1/2-28UNEF-2B 5/8-24UNEF-2B 5/8-24UNEF-2B 3/4-20UNEF-2B 7/8-20UNEF-2B 1-20UNEF-2B 3/4-20UNEF-2B 7/8-20UNEF-2B Shell Size 16 18 20 22 24 28 32 36 40
** Barrel engaging face to shoulder.
A Thread 1-20UNEF-2B 1-1/8-18UNEF-2B 1-1/4-18UNEF-2B 1-3/8-18UNEF-2B 1-1/2-18UNEF-2B 1-3/4-18UNS-2B 2-18UNS-2B 2-1/4-16UN-2B 2-1/2-16UN-2B
Performance Specifications - Page 168 Contact, Sealing Plugs, Assembly Tools - Page 187 Contact Arrangements - Page 171-174
Dimensions are shown in inches (millimeters). Dimensions subject to change.
www.ittcannon.com
177
MIL-C-5015 Connectors
Box Mounting Receptacle
MS3102E/MS3102R CA3102E/CA3102R X DIMENSION Max. Solder Pot Ext. - Pin or Socket Shell Size 8S, 10S, 10SL 12S, 14S, 16S 12 14 16 .534 .518 .705 .705 .705 .674 .674 .612 .549 Contact Size 12 8 .705 .705 .705 .674 .674 .612 .549 .767 .767 .736 .736 .674 .611 4 .767 .736 .736 .674 .611 0 .971 .909 .846 T Dia. 4 Mtg. Holes S R
MS-E/F/R/ER
L M K
MS3102E and MS3102R box mounting receptacles are used in junction boxes or as an integral part of equipment. These connectors are identical in construction and will mate with 3106, 3107 and 3108 plugs. For new equipment, customer should specify MS3102R.
16 18 20,22 24,28 32,36
P A Thd. (Class-2A) B X Max. Solder Pot Extension
90 Angle Plug
MS3108E/MS3108R CA3108E/CA3108R
MS3108R 90 angle plugs with O ring seal less cable clamp) and the MS3108E 90 angle plugs (less O ring seal with cable clamp) are used where there is limited space and where wires must be brought at abrupt angles. This plugs will mate with 3100 and 3102 receptacles and 3101 plugs.
P
1
L3 Y J** A Thd. (Class-2B)
X
1
End of Thread (MS3108R)
Thread for Attachment of M85049/41 (MS3057) Cable Clamp
V1
See page 185 for cable clamp dimensions. M +.031 (0.79) -.000 (0.00)
.562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .562 (14.27) .750 (19.05) .750 (19.05) .750 (19.05) .750 (19.05) .750 (19.05) .750 (19.05) .812 (20.62) .812 (20.62) .875 (22.23) .875 (22.23) .875 (22.23)
Shell Size
8S 10S 10SL 12S 14S 16S 12 14 16 18 20 22 24 28 32 36 40
B Min.
.375 (9.53) .375 (9.53) .375 (9.53) .375 (9.53) .375 (9.53) .375 (9.53) .625(15.88) .625(15.88) .625(15.88) .625(15.88) .625(15.88) .625(15.88) .625(15.88) .625(15.88) .625(15.88) .625(15.88) .625(15.88)
J** Max.
.536 (13.61) .536 (13.61) .536 (13.61) .536 (13.61) .536 (13.61) .536 (13.61) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39)
K Max.
.125 (3.18) .125 (3.18) .125 (3.18) .140 (3.56) .140 (3.56) .140 (3.56) .146 (3.71) .146 (3.71) .146 (3.71) .180 (4.57) .180 (4.57) .180 (4.57) .203 (5.16) .203 (5.16) .203 (5.16) .203 (5.16) .203 (5.16)
L Max.
1.040 (26.42) 1.040 (26.42) 1.040 (26.42) 1.040 (26.42) 1.040 (26.42) 1.040 (26.42) 1.400 (35.56) 1.400 (35.56) 1.400 (35.56) 1.400 (35.56) 1.400 (35.56) 1.400 (35.56) 1.400 (35.56) 1.400 (35.56) 1.400 (35.56) 1.400 (35.56) 1.400 (35.56)
3 L Max.
P Max.
.426 (10.82) .520 (13.21) .614 (15.60) .614 (15.60) .739 (18.77) .864 (21.95) .614 (15.60) .739 (18.77) .864 (21.95) .989 (25.12) 1.145 (29.08) 1.270 (32.26) 1.395 (35.43) 1.614 (41.00) 1.864 (47.35) 2.051 (52.10)
P1 Max.
.844 (21.44) .969 (24.61) .969 (24.61) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.344 (34.14) 1.469 (37.31) 1.594 (40.49) 1.719 (43.66) 1.969 (50.01) 2.219 (56.36) 2.469 (62.71)
R + .005 _
.594 (15.09)
S + .031 _
.875 (22.23)
T +.010 -.005
.120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .147 (3.73) .147 (3.73) .173 (4.39) .173 (4.39) .173 (4.39)
V1 Max.
1.281 (30.94) 1.250 (31.75) 1.281 (32.54) 1.281 (32.54) 1.406 (35.71) 1.531 (38.89) 1.281 (32.54) 1.406 (35.71) 1.531 (38.89) 1.593 (40.46) 1.656 (42.06) 1.718 (43.64) 1.890 (48.01) 1.968 (49.99) 2.187 (55.55) 2.406 (61.11) 5.875 (149.22)
X1 Max.
.811 (20.60) .842 (21.39) .873 (22.17) .873 (22.17) .936 (23.77) .998 (25.35) .873 (22.17) .936 (23.77) .998 (25.35) 1.061 (26.95) 1.123 (28.52) 1.186 (30.12) 1.263 (32.08) 1.342 (34.09) 1.561 (39.65) 1.780 (45.21) -
Y Max.
1.640 (41.66) 1.640 (41.66) 1.703 (43.26) 1.703 (43.26) 1.765 (44.83) 1.796 (45.62) 2.062 (52.37) 2.125 (53.98) 2.156 (54.76) 2.250 (57.15) 2.312 (58.72) 2.312 (58.72) 2.531 (64.29) 2.531 (64.29) 2.750 (69.85) 2.875 (73.02) 5.690 (144.53)
2.156 (54.76) 2.156 (54.76) 2.188 (55.58) 2.188 (55.58) 2.312 (58.72) 2.406 (61.11) 2.531 (64.29) 2.688 (68.28) 2.781 (70.64) 2.844 (72.24) 3.250 (82.55) 3.250 (82.55) 3.719 (94.46) 3.719 (94.46) 4.188 (106.38) 4.297 (109.14) 7.211 (183.16)
.719 (18.26) 1.000 (25.40) .719 (18.26) 1.000 (25.40) .812 (20.62) 1.094 (27.79) .906 (23.01) 1.188 (30.18) .969 (24.61) 1.281 (32.54) .812 (20.62) 1.094 (27.79) .906 (23.01) 1.188 (30.18) .969 (24.61) 1.281 (32.54) 1.062 (26.97) 1.375 (34.93) 1.156 (29.36) 1.500 (38.10) 1.250 (31.75) 1.625 (41.28) 1.375 (34.93) 1.750 (44.45) 1.562 (39.67) 2.000 (50.80) 1.750 (44.45) 2.250 (57.15) 1.938 (49.23) 2.500 (63.50) 2.188 (55.58) 2.750 (69.85)
2.390 (60.71) 2.723 (69.16)
Not to MS specification A Thread Shell Size
8S 10S 10SL 12S
** Barrel engaging face to shoulder.
A Thread 90 Angle Plug
1/2-28UNEF-2B 5/8-24UNEF-2B 5/8-24UNEF-2B 3/4-20UNEF-2B 7/8-20UNEF-2B 1-20UNEF-2B 3/4-20UNEF-2B 7/8-20UNEF-2B
Box Mounting Receptacle
1/2-28UNEF-2A 5/8-24UNEF-2A 5/8-24UNEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 1-20UNEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A
Shell Size
16 18 20 22 24 28 32 36 40
Box Mounting Receptacle
1-20UNEF-2A 1-1/8-18UNEF-2A 1-1/4-18UNEF-2A 1-3/8-18UNEF-2A 1-1/2-18UNEF-2A 1-3/4-18UNS-2A 2-18UNS-2A 2-1/4-16UN-2A 2-1/2-16UN-2A
90 Angle Plug
1-20UNEF-2B 1-1/8-18UNEF-2B 1-1/4-18UNEF-2B 1-3/8-18UNEF-2B 1-1/2-18UNEF-2B 1-3/4-18UNS-2B 2-18UNS-2B 2-1/4-16UN-2B 2-1/2-16UN-2B
Performance Specifications - Page 168 Contact, Sealing Plugs, Assembly Tools - Page 187 Contact Arrangements - Page 171-174
14S 16S 12 14
Dimensions are shown in inches (millimeters). Dimensions subject to change.
www.ittcannon.com
178
MIL-C-5015 Connectors
How to Order
MS type potting connectors are available with nylon cups. 00 and 06 shell styles with plastic cups and resilient insulators meet the requirments of MS3103 and MS25183. Also available is the 08 plug with resilient insulator and 90 angle nylon potting cup. ITT Cannon provides for a 1/4" clearance for potting on all contact sizes.
MS-E/F/R/ER
MS 25183 MS 3103 CA 3100 PREFIX SHELL STYLE CLASS SHELL SIZE CONTACT ARRANGEMENT CONTACT TYPE PREFIX CA - ITT Cannon prefix indicating special application or variation of MS SHELL STYLE 3100 - Wall mounting receptacle (MS3103) 3106 - Straight plug (MS25183) 3108 - 90 angle plug CLASS ER - Resilient insulator, nylon potting cup and thread attachment ring No class designator for MS types.
ER
18 - 10 18 - 10 18 - 10
P P P
SHELL STYLE Coupling thread diameter figured in sixteenths of an inch COTNACT ARRANGEMENTS See pages 171-174 COTNACT TYPE P for Pin: S for Socket
Wall Mounting Receptacle
MS3103 Nylon Potting Cup Threaded Attachment Ring CA3100ER S R L Polarizing Boss
T Dia. 4 Mtg. Holes
A Thd.
The CA3100ER receptacle (MS3103) is supplied with a resilient insulator and nylon potting cup with a threaded attachment ring. This receptacle mates with 3106, 3107, and 3108 plugs.
R +.010 (+0.25) -.005 (+0.13) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .120 (3.05) .147 (3.73) .147 (3.73) .173 (4.39) .173 (4.39)
Shell Size 8S 10S 10SL 12S 14S 16S 12 14 16 18 20
L Max. 1.531 (38.89) 1.531 (38.89) 1.531 (38.89) 1.531 (38.89) 1.531 (38.89) 1.531 (38.89) 1.968 (49.99) 1.968 (49.99) 1.968 (49.99) 1.968 (49.99) 2.188 (55.58) 2.188 (55.58) 2.188 (55.58) 2.188 (55.58) 2.188 (55.58) 2.188 (55.58)
R + .005 (+ 0.13) _ _ .594 (15.09) .719 (18.26) .719 (18.26) .812 (20.62) .906 (23.01) .969 (24.61) .812 (20.62) .906 (23.01) .968 (24.59) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.375 (34.92) 1.562 (39.67) 1.750 (44.45) 1.938 (49.23)
S Max. .906 (23.01) 1.031 (26.19) 1.031 (26.19) 1.125 (28.58) 1.219 (30.96) 1.312 (33.32) 1.125 (28.58) 1.219 (30.96) 1.312 (33.32) 1.406 (35.71) 1.531 (38.89) 1.656 (42.06) 1.781 (45.24) 2.031 (51.59) 2.281 (57.94) 2.531 (64.29)
A Thread 1/2-28UNEF-2A 5/8-24NEF-2A 5/8-24NEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 1-20UNEF-2A 3/4-20UNEF-2A 3/4-20UNEF-2A 1-20UNEF-2A 1-1/8-18NEF-2A 1-1/4-18NEF-2A 1-3/8-18NEF-2A 1-1/2-18NEF-2A 1-3/4-18NS-2A 2-18NS-2A 2-1/4-16UN-2A
Performance Specifications - Page 168 Contact, Sealing Plugs, Assembly Tools - Page 187 Contact Arrangements - Page 171-174
22 24 28 32 36
Dimensions are shown in inches (millimeters). Dimensions subject to change.
www.ittcannon.com
179
MIL-C-5015 Connectors
Straight Plug
MS25183 Nylon Potting Cup Rubber Gasket CA3106ER Lenght of Engagement Gasket A Thd. P
MS-E/F/R/ER
Metal Potting Ring J 1/4" To end of contact
L
The CA3106ER plug is supplied with resilient insulators, nylon potting cups with threaded attachment rings, and a rubber gasket under the coupling nut. This plug mates with 3100 and 3102 receptacles and 3101 plugs.
90 Angle Plug
Nylon Potting Cup Rubber Gasket CA3108ER L B A Thd. D Metal Potting Ring
P Dia.
Polarizing Groove
The CA3108ER is supplied with resilent insulator, 90 nylon potting cup and threaded attachment ring with a rubber gasket under the coupling nut. This plug mates with 3100 and 3102 receptacles and 3101 plugs.
CA3106ER
CA3108ER
L Max. For Arr. w/#16 & #12 Contacts 1.463 (37.16) 1.600 (40.64) 1.600 (40.64) 1.600 (40.64) 1.910 (48.51) 1.910 (48.51) 1.910 (48.51) 2.100 (53.34) 2.100 (53.34) 2.100 (53.34) 2.281 (57.94) 2.485 (63.12) 2.485 (63.12) 2.485 (63.12) For Arr. w/#8 & #4 Contacts 2.300 (58.42) 2.550 (64.77) 2.610 (66.29) 2.850 (72.39) 2.850 (72.39) 2.850 (72.39) 2.850 (72.39) 2.985 (75.82) 2.985 (75.82) 2.985 (75.82) 2.985 (75.82)
Shell Size 8S 10S 10SL 12S 14S 16S 12 14 16 18 20 22 24 28 32 36 40
J Max. .536 (13.61) .536 (13.61) .536 (13.61) .536 (13.61) .536 (13.61) .536 (13.61) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39)
L Max. 1.562 (39.67) 1.562 (39.67) 1.562 (39.67) 1.562 (39.67) 1.562 (39.67) 1.562 (39.67) 2.000 (50.80) 2.000 (50.80) 2.000 (50.80) 2.000 (50.80) 2.125 (53.98) 2.125 (53.98) 2.125 (53.98) 2.125 (53.98) 2.180 (55.37) 2.180 (55.37) 2.180 (55.37)
P Max. .844 (21.44) .969 (24.61) .969 (24.61) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.344 (34.14) 1.469 (37.31) 1.594 (40.49) 1.719 (43.66) 1.969 (50.01) 1.219 (30.96) 2.469 (62.71) 2.723 (69.16)
A Thread 1/2-28UNEF-2B 5/8-24UNEF-2B 5/8-24UNEF-2B 3/4-20UNEF-2B 7/8-20UNEF-2B 1-20UNEF-2B 3/4-20UNEF-2B 7/8-20UNEF-2B 1-20UNEF-2B 1-1/8-18UNEF-2B 1-1/4-18UNEF-2B 1-3/8-18UNEF-2B 1-1/2-18UNEF-2B 1-3/4-18UNS-2B 2-18UNS-2B 2-1/4-16UN-2B 2-1/2-16UN-2B
B Max. .563 (13.61) .563 (13.61) .563 (13.61) .563 (13.61) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39) .724 (18.39)
D Max. 1.040 (26.42) 1.040 (26.42) 1.040 (26.42) 1.290 (32.77) 1.040 (26.42) 1.040 (26.42) 1.290 (32.77) 1.290 (32.77) 1.540 (39.12) 1.540 (39.12) 1.790 (45.47) 2.040 (51.82) 2.290 (58.17) 2.540 (64.52)
P Max. .969 (24.61) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.062 (26.97) 1.156 (29.36) 1.250 (31.75) 1.344 (34.14) 1.469 (.37.31) 1.594 (40.49) 1.719 (43.66) 1.969 (50.01) 1.219 (30.96) 2.469 (62.71)
A Thread 5/8-24UNEF-2B 3/4-24UNEF-2B 7/8-20UNEF-2B 1-20UNEF-2B 3/4-20UNEF-2B 7/8-20UNEF-2B 1-20UNEF-2B 1-1/8-18UNEF-2B 1-1/4-18UNEF-2B 1-3/8-18UNEF-2B 1-1/2-18UNEF-2B 1-3/4-18UNS-2B 2-18UNS-2B 2-1/4-16UN-2B
Performance Specifications - Page 168 Contact, Sealing Plugs, Assembly Tools - Page 187 Contact Arrangements - Page 171-174
Dimensions are shown in inches (millimeters). Dimensions subject to change.
www.ittcannon.com
180
MIL-C-5015 Connectors
Components
MS3106R CA3106R Straight Plug Endbell MS3106F CA06R Straight Plug MS3106E* CA3106E Straight Plug MS3108E CA3108E 90 Angle Plug
MS-E/F/R/ER
MS3108R CA3108R 90 Angle Plug
CABLE CLAMP
Ferrule
Grommet
Pin Contacts
Insulator
Coupling Nut
Barrel
O Ring
Note: Class F is not applicable to MS3108 shell style.
* Class E inactive for new design. Use Class F or R.
Dimensions are shown in inches (millimeters). Dimensions subject to change.
www.ittcannon.com
181

▲Up To Search▲

Price & Availability of CA3100E20-27PWF80

	To Download CA3100E20-27PWF80 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .